Cant Access Web interface
Hello, I just got the LM2000 from my company but I cant set it up! I first did a factory reset. It is activated properly. I plugged an ethernet into eth0 on the four port selection in the front and...
View ArticleCannot ping from other vlan
I just setup my first VLM-1000 and I am unable to ping the machine from my laptop. If i remote into a server on the same Vlan i can ping it and connect to the web interface but i get nothing when...
View ArticleFirmware 7.0 and Safari on iOS
Hello,after upgrading to firmware 7.0 on a LoadMaster 2500 the web frontend will not be displayed correctly on iOS (tested on iPhone 5 and iOS Simulator).Best regardsMarkus Knaup
View ArticleClik here to view.
Load Balancer as Default Gateway and RDP
Currently all of our load balance services either run at L4 or in non-transparent mode but we now have a requirement to configure an SMTP service as L7 transparent due to the source IP address.The...
View ArticleAdaptive Script returns value 0 in real Servers Statistik
Hi!We have a Windows 2008R2 Terminal Server Farm with 12 Servers up and running.I´ve tried to geht the next two Servers to work, but were not able to get the adaptive Script working properly.The...
View ArticleError when trying to access a VS from the Internet
I have a VS set up and it works perfectly when accessing it from the internal network. When I try to access it from the Internet I receive the following error in the loadmaster logs:Jun 4 17:38:01...
View ArticleNot able to monitor Ironport as a real server
I have created an SMTP virtual service for KEMP which directs traffic to an Ironmail (real) server, however the server cannot be monitored on port 25 using SMTP protocol. However, if I disable...
View ArticleKEMP and Cisco ASA5550 - Connections being reset
We have a working test configuration for Exchange 2010 sat behind a KEMP LM-3600 (HA Pair). This all works fine internally, but our Networks team are wanting to put this behind an Cisco ASA5550.We have...
View ArticleMigration Scenario: Ex2003 ->2010 HA via LM problem accessing 2010 HA from...
Hello Board,i´m having problems in setting up my needed routinggroupconnector to connect 2003 server with an ex2010 system.My configuration so far:One Exchange Server 2003IP:10.0.255.107Two Exchange...
View ArticleExchange 2010 CAS gateway with Kemp virtual VLM 1000
Hello,We have deployed a VLM 1000 for our Exchange 2010 CAS array. The servers and the load balancer are in the same VLAN and same subnet. If I turn off the transparency in the virtual service...
View ArticleSMTP Relay for Servers in same Subnet
I've just setup a HA pair of VLM-1000 servers and configured a VIP for load balancing SMTP traffic for application servers and scanners (scan2mail). I have 2 Exchange 2010 servers in Multi-role setup...
View ArticleExchange 2013 and 2 x Kemp VLM-100; can't seem to get this to run
I have 2 Exchange 2013 VM's running both roles, a DAG has been set-upbetween these two and that works excellent.I have followed this link mostly for Load...
View ArticleRandom connections drops
I'm having an issue with my users getting random connection drops. Sometimes after 3 mins and other times after 10 mins. Users are directed to the main URL, lets say 123abc.com and then depending on...
View ArticleOWA Time out for Public and Private
We have a problem with OWA timing out after 5-10 minutes when both real server are enabled in the VIP. When only one real server is enabled OWA works fine. We have verified the timeout setting on both...
View ArticleLoadBalancer Backup wget
Hello, we take backups every day with this method wget --no-check-certificate https://backupuser:backuppassword@192.168.30.244/progs/admin/backup?ba=C... -O LoadBalancer-backup_20090716wget...
View ArticleExchange 2010 Resets after 30 seconds
Hi,We have a two-member Exchange 2010 CAS Array behind a LoadMaster (6.0-28a). We've been struggling with Outlook users constantly being prompted for credentials for some time. Other than that,...
View ArticleModify URL Server->Client
Is there a way to hide or remove the URL back to the client?Right now I've got a scenario where when I go to:www.myservice.orgI get redirected by Content Rules tomyserver1/whateverurl/which in turn...
View ArticleSharePoint 2013 Host Header
Hi @ all, We want to Publish some of our SharePoint Sites with our two Loadmaster.The SharePoint FE Server are configured to listen on 443 and host heaers.So we create new SAN certificates for the...
View Articleusa housing market
הדרכה מקצועית בשביל מתענייני נדלן בארה"ב. בא לכם לקבל הדרכה איך מבצעים השקעות נדל"ן באמריקה על הצד הטוב ביותר? הציצו כאן http://www.jonpa.com/blog/880/us-real-estate/
View Article