My LB has two interfaces
eth0: x.x.194.32/28 (gw: x.x.194.33)
eth2: x.x.194.48/28 (gw: x.x.194.49)
I try to connect from y.y.102.5 to my virtual service running on x.x.194.58
Incomming trafic goes through eth2 (correct), but response passes through eth0 (incorrect)
I've of course defined default gateway for that virtual service = x.x.194.49
I have Vers:7.0-14b and i tried to check "Use Default Route Only" option but it doesn't solved the problem.
After enabling this option I noticed big delays in comuication on that vservice.
Services running on x.x.194.32/28 subnted worked correctly.
eth0: x.x.194.32/28 (gw: x.x.194.33)
eth2: x.x.194.48/28 (gw: x.x.194.49)
I try to connect from y.y.102.5 to my virtual service running on x.x.194.58
Incomming trafic goes through eth2 (correct), but response passes through eth0 (incorrect)
I've of course defined default gateway for that virtual service = x.x.194.49
I have Vers:7.0-14b and i tried to check "Use Default Route Only" option but it doesn't solved the problem.
After enabling this option I noticed big delays in comuication on that vservice.
Services running on x.x.194.32/28 subnted worked correctly.